12-10-2022 09:26 AM
We had a power outage and when the device boot back up it could only boot into secondary, which I believe is router mode. Do I need a replacement device or is there a way to reload the primary boot partition? Please let me know if you need any other information. This is preventing all of our devices from connecting to the internet.
Thanks
Solved! Go to Solution.
12-12-2022 02:00 PM
Hi @salaymeh
Great, I am glad now all it's working fine, Please feel free to mark the post as ACCEPTED SOLUTIONS.
Best regards,
Yarenis Hernández
Technical Support Engineer | L2 TAC Wired
12-12-2022 12:21 PM - edited 12-12-2022 12:22 PM
Hi @salaymeh
That is correct, just the image because that new code is UFI(unified), which means the image has all.
Best regards,
Yarenis Hernández
Technical Support Engineer | L2 TAC Wired
12-12-2022 01:50 PM
Thanks, I now have both the primary and secondary flash running version SPS08095. I've tested booting from both and they are working correctly.
12-12-2022 02:00 PM
Hi @salaymeh
Great, I am glad now all it's working fine, Please feel free to mark the post as ACCEPTED SOLUTIONS.
Best regards,
Yarenis Hernández
Technical Support Engineer | L2 TAC Wired