Rebooted ruckus and now access points don’t work

[Ferniegc]

Hi I tried rebooting the ruckus and now the access points don’t light up, I’ve tried powering on the system with the reset button pushed and nothing happens. I don’t have a laptop or computer to do all of the other things that were stated in some of the topics. Help ! 

[Jayavidhya]

Hi @Ferniegc 

Sorry for the inconvenience.

To solve this issue please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community
 

[Ferniegc]

Tried to copy Mnz.10114.bin and got the following error: 

ivalid input -> bootrom 

again this is extremely difficult with not a lot of help of what to do if something doesn’t work 

[Jayavidhya]

Hi @Ferniegc 

For detailed understanding of the issue please share the output of the following commands.

Mount disk0

Show files disk0 

Best regards,

Jayavidhya

Lennar Home Community

[Ferniegc]

ICX7150-C12 Switch#show files disk0
F 1048576 $TXRAJNL.DAT
F 25976488 SPS08080f.bin
F 58690116 SPS08095gufi.bin
F 786944 mnz10114.bin
D 16384 [----] disk0/System Volume Information

I have already installed the 8095.gufi files to both partitions. when I enter showflash this is what I get. and when I reboot the switch I still get the amber light.

Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Sec Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Compressed Sec Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Code Flash Free Space = 1013227520

[Jayavidhya]

Hi @Ferniegc 

Thanks for your response.

As you have already on upgraded version please enter the following commands.

Enable 

copy disk0 flash SPS08095hufi.bin secondary 

write memory

Boot system flash secondary yes

Best regards,

Jayavidhya

Lennar Home Community