Ruckus ICX FastIron 08.0.90d upgrade to 8095G

[daddygoat]

Hello,

My issue is with the switch being removed from my network then being added back on and this can happen multiple times a day every day and severely interrupts my work. Details below:

[daddygoat]

ISP is Windstream https://www.windstream.com/

[Imran_ruckus]

Hi @daddygoat 

Thank you for the response and the detailed information.

As per the lights status of the Switch and command outputs, it seems in a normal state.

However, I would suggest factory reset the Switch using below commands:

Please note, there will NOT be any loss of data or configuration. Factory reset will just reset with the default configuration. 

Please perform the below commands to factory reset the RUCKUS ICX-7150-C12P Switch. (Also please refer to the below screenshot)

enable 

erase system factory-default

y

Please follow the steps, check the stability and confirm the status.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

[daddygoat]

Imran, I've completed the factory reset and will monitor closely for any issues. Thank you for the quick replies on this ticket. Very helpful.

[Imran_ruckus]

Hello @daddygoat 

Thank you for your response and the update.

Please keep me informed about any developments regarding this issue. I am here to assist you further.

Your patience and understanding are greatly appreciated.

Best regards,

Imran Sanadi  
RUCKUS Lennar Home Community