cancel
Showing results for 
Search instead for 
Did you mean: 

Re: ICX7150-C12 Switch - POE Fatal

lenar_ruck_user
New Contributor

Hi,

I am having this same problem ("PoE Fatal: Vmain (48V) fault has forced all ports on slot 0 to lose power."). The APs started to sporadically lose POE after a power outage.

I started down this path:How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

However, after the first reboot I have lost access to the console due to constant POE error messages.

I have tried both methods referenced above to "To disable the logs for the PoE error, run the next commands."

Neither worked.

I made to this step (20- Once the switch is running 8080f version, we can proceed to install the 8095hufi, in this version as I mentioned previously, the boot code is not needed to be install separately since it is included in the same file.) but can't really verify versions etc. since my console filled with errors.

What should I try next?

 

21 REPLIES 21

ingosds
New Contributor

Hi,

after so many attempts I gave up and bought a new switch from a completely different brand. A shame since ruckus is known as high end equipment. Now I have my ruckus switch collecting dust since I cant make it work. 

pinky_ruckus
Moderator
Moderator

Hello @ingosds ,

I hope this message finds you well.

Could you please create a new post as this was raised by another user?

If there are any issues with the hardware, we are happy to replace the device for you.

If you need any assistance with creating the new post or have any questions, please feel free to reach out.

Thank you for your cooperation and understanding.

 

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community