Hey all I'm a frequent lurker but have not posted before here. I've got the Lennar at home setup with 3 R510s and an ICX7150. Currently I've got the APs connected to the switch in ports 2,4, and 6. Port 1 is my ISP which shows it at 1G-Full configured speed auto (I have fiber). My APs however are set to auto as well but are setting themselves to only 100-full. I've tried switching ports and manually setting the configured speed mode to 1G-Full-Master (this and slave are the only options for 1G). This caused the APs to drop connection and I had to go back in and reset it to auto.
I'm running the latest firmware on the APs and SPS08095d on the switch. Lines to the APs are Cat 6a.
Any thoughts at what could be causing this?