08-07-2023 12:07 PM
Hello, I confirmed per this that I am on SPS for both partitions https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/My-ruckus-R510-series-keeps-... . So what else could be the issue?
Happy to share logs.
Thank you
08-07-2023 02:13 PM
Hi @persepheone
Thanks for your response.
The recommended stable version is 8095g. So please try to upgrade the switch to the code 8095g and let us know the result.
Below are the options or methods to perform the Upgrade on the switch:
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive
2. Upgrade a Switch ICX7150-C12P via TFTP
3. Upgrade a switch via Web GUI (ICX7150 Switch)
Please let me know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
08-07-2023 03:55 PM
Do you have instructions for upgrading through Mac devices?
08-07-2023 05:21 PM
Complete the update I think
ICX7150-C12-Switch#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Sec Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Compressed Sec Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Code Flash Free Space = 1209692160
ICX7150-C12-Switch#
08-08-2023 05:25 AM
Hi @persepheone
Thanks for your response.
Please confirm whether the issue got resolved or not.
Best regards,
Jayavidhya
Lennar Home Community
08-08-2023 12:09 PM
It seems to be stable right now. I will report back again in a couple of days if that's correct. But I can't the Switch to be controllable through Unleashed. It shows as pending, I enter the credentials, but it says the credentials are invalid. Is there an easy fix? Or should I let it be?