R510

[Rod14]

Hello, 

I recently purchased a Lennar home. The previous owners left behind the equipment. I am able to get the switch on but the 2 R510 aren’t turning on. I tried to reset the switch and the board lights up with amber lights and that’s all that happens. 

[pinky_ruckus]

Hello @Rod14 ,

Thank you for the response.

I understand that you have completed reset on the Switch.

As the reset was not performed successfully, the only option is to perform Software recovery.

Please note, you must use ethernet cable (both ends RJ45 plugs) and USB to type C cable both together for Software Recovery process as described in steps 2 & 3 in the guide link.

May I please know if you have an option to arrange a laptop with an Ethernet cable port to complete the software recovery process?

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[pinky_ruckus]

Hello @Rod14 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @Rod14 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hi @Rod14 ,

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community

[pinky_ruckus]

Hello @Rod14 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.