04-21-2023 08:46 AM
Just establish an account. Email address ftallent@aol.com. Sorry for the duplicate issue. Bought a new construction townhome with Lennar in May 2018 with the Ruckus wireless system pre-installed in my house. Recently, had inclement weather and both the upstairs and downstairs R510 access point units no longer have power. The ICX 7150-C12P seems okay but the ports that both R510s are plugged into do not respond.
Need help please,
Fred Tallent
Kissimmee, Fl.
04-21-2023 08:28 PM
BTW I have switched the port connections from the 11:54 am Reply
04-24-2023 04:46 AM
Just noticed that I did not indicate the color status for Port #11 on my previous reply. Port #11 - Lutron Lights -Amber.
04-24-2023 09:25 AM
Hi @FET4771
Thanks for the details provided.
Basically if the switch has one green and one yellow light, it means that the switch is stuck in boot mode.
1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.
2-Please try to press the reset button using a paper click or a small stick
Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4
If this step doesn't work, we need to perform a software recovery.
Here is the quick guide to perform software recovery.
If the resetting process doesn't work, we need to perform a software recovery.
Here is the quick guide to perform software recovery.
How to perform a Software recovery on an ICX7150 switch
Ruckus ICX Recovery Load boot code from boot monitor
https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive
2. Upgrade a Switch ICX7150-C12P via TFTP
3. Upgrade a switch via Web GUI (ICX7150 Switch)
Best regards,
Jayavidhya
Lennar Home Community
04-24-2023 12:22 PM
Hi @FET4771
Sorry for the inconvenience.
1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.
2-Please try to press the reset button using a paper click or a small stick .
Please follow the below link which explains the hard reset of the switch in detail.
Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
05-02-2023 07:27 AM
Hi @FET4771
If the factory reset process doesn't work, we can try performing software recovery process.
Here is the quick guide to perform software recovery.
How to perform a Software recovery on an ICX7150 switch
Ruckus ICX Recovery Load boot code from boot monitor
https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s
Best regards,
Jayavidhya
Lennar Home Community