cancel
Showing results for 
Search instead for 
Did you mean: 

Perfectly functional ICX7150 switch started rebooting since a week; every couple of minutes

adityabhutada
New Contributor

Never had any issue for 2 years, and all of sudden since last Friday 17 July 2026, I noticed this switch rebooting after every couple of minutes / hours. So frustrating, that I don't have a stable connection. 

CLI log gave no clue, it does boot in to switch mode only. Works for a couple of minutes (~10 or 20 minutes) and then restarts. 

Currently this switch is connected to Xfinity's modem+router. 

Need help to resolve this issue quickly. 

5 REPLIES 5

Hi @adityabhutada 

Greetings!

Thank you for your response and the update.

For Lennar users, 08.0.95g is currently considered the recommended stable firmware version.

However, if you prefer, you may also upgrade to 08.0.95t, which is available here:

https://support.ruckuswireless.com/software/4763-ruckus-icx-fastiron-08-0-95t-ga-software-release-zi...

To use 08.0.95t, simply follow the same steps outlined in the Lennar Knowledge Base article below and replace the 08.0.95g firmware image with the 08.0.95t image during the upgrade process:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-71...

Please let us know how it goes.

Thank you.

 

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support