Not Able to connect my unleashed R510 ACCESS point

[JMeza5]

I am not able to connect my unleashed R510 Access point.  Please advise as soon as possible. 

[Vásquez_Fer]

Hi @JMeza5 

Hope you are doing well ! 

Please make sure that the cables from your local router and ICX-7150-C12P are connected correctly : 

I will leave a guide that can help you on that : 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

If it is necessary please preform a factory reset to one of the Wireless access Point here I leave a guide please read it carefully and step by step.

Note:For the Factory reset you must disconnect all the access points of the ICX-7150-C12P and only leave on or connected one with which you are going to work the factory reset.

Physical Factory Reset an Access Points Ruckus

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Ac...

Ruckus Unleashed Set-up using your Mobile

 https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-Unleashed-Set-up-usi...

Best Regards 

Fernando Vasquez