No AP lights

[dsmith160]

Power outage no AP LED lights. Switch/Hub ICX 7150 C12P has LED's SYST orange & PWR LED green. No other LED's on. Status area no LED's lights on for STAT, SPD, ID or PoE. Don't know how long to press reset. No output coming from any of the ports, that I tried. Unplugged at outlet, letting the unit cool for 30 minutes, still nothing. AP shows no signs of getting power. No lights at all. Not able to open Unleashed Home on my cell phone. Asks for Configure.Me-XXXX my Wifi does not find or show file. Can't open Typical Install or Gateway Install or Manage Network. When I login I get message that says: Unable to reach Unleashed Network. Please make sure device is connected to the Unleashed Network, Yes or No.

[pinky_ruckus]

Hello @dsmith160 ,

Thank you for the response.

Kindly upload the pictures again along with the screenshots.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[dsmith160]

I did!

[pinky_ruckus]

Hello @dsmith160 ,

Thank you for sharing the videos.

Based on the troubleshooting done, your ICX-7150-C12P Switch is stuck in bootmode and tried to complete the software recovery. However, you were unable to complete the software recovery. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @dsmith160 ,

Thank you for the response.

Kindly share a picture showing the cable connections between the Switch and the laptop during the Software Recovery process. Also, share the screenshots of the point where you are getting stuck during the recovery process.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @dsmith160 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.