My ICX 7150 stopped sending power to my 2 AP's.

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

I've had this issue several times since we bought our home in 2021. From What I understand from neighbors and reading through the forum, there is some sort of issue with the firmware which I am not sure if it causes the accesspoints or switch to go into router mode and they no longer are able to recover. In the past I've spent hours resetting the switch and eventually the AP's would power on. Recently we had another power outage during a stomr and I have facing the same issue. I've followed several help forums and have done hard resets (unplugging and holding the reset button for 10s) and the AP's have yet to power back on. I know that Ruckus had replaced several of my neighbors hardware in the past, and I am curious if this option is still available.

2 REPLIES 2