Known issue: Iphone with IOS 16 can't reach "unleashed.ruckuswireless.com" after connected to Unleashed network (Wireless Lennar Home network)

[DavidCh]

Hello Community,

This is an announcement about this know issue we are currently working on Please check this information if you run into it.

Issue: iPhone with IOS 16 can't reach "unleashed.ruckuswireless.com" after connected to Unleashed network

Error message: "Not connected to the Unleashed network"

PLEASE NOTE: This is a known issue on which we are working with our Engineering Team internally. And This issue is expected to be fixed in the upcoming Unleashed version 200.14 software release and the App Release.  

The estimated Time of Arrival (ETA) for the release is Mid of July 2023.

For now, please refer to the workaround, that will be using the IP Address of Master AP as described in the below process.

If you haven’t tried Accessing Unleashed on a web browser via the IP address of the Access Points, could you please try to find the Master IP address of the Access Point and try to check it on a browser? Please refer to the below guide to find the IP address.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Device...

You should see the below Unleashed dashboard after finding the IP Address of the AP. Try to log in

Refer to the below screenshot to know your MASTER IP Address on the Web Unleashed system.

Once you find and can log in via the IP Address of the Unleashed Master Access Point, please try the below steps.

1. Make sure you are connected to the RUCKUS Access Point Wi-Fi Network.

2. Click on ‘change login destination’. (Please refer to the below screenshot)

 3. Put your Unleashed MASTER Access Point IP Address as ‘Destination IP’ and save it. (Please refer to the below screenshot and 0.0.0.0 is just an example)

4. Now try to log in to Unleashed App using your credentials.

Please follow ALL 4 STEPS as explained above.

If you have any questions about the Steps for the workaround please open a new post using this as reference.

Best regards,

David Chavarria  | Technical Support Manager.

[jedy52]

Just wanted to say thank you to Imran who was very helpful supporting my issues for the past week.   Finally finished and successfully restored my ICX-7150 c12p.   With all the steps and guides which as a normal Lennar home owner wouldn't been able to do the back end programming.   Though it was so difficult, but with his help.... it all turned out well.   Thank you for all the hard work... Hopefully this version of 08095gufi.bin will be the version to last longer.

@Imran.... once again thank you.