We had a short power outage and since then the Wifi is working only sporadically and slow. Certain sites/Apps do not work at all when connected to the Access points, however everything works through the Wifi from the provider which leads me to believe its an issue with the ICX7150 switch. I tried to find a solution in the forums but am unable to access the Ruckus switch. None of the passwords suggested works to get access. I need help to fix my connection.
Since you are already on a version 8090d in this case 8090d you don't need the boot folder since the new versions UFI ( 8090 code or later ) version include ( everything in the image.bin file ) the fastiron OS, boot code, POE firmware, etc. all in one .bin
Check on the following guide from point '20' :
How to Upgrade a Switch ICX-7150-C12P using a USB flash drive
The good news is that I got the software uploaded and the system appears to be running OK, however I only have one component (a switch) and the accounts (even the super account to administrate) are not working or say no password defined (see response below). Can you advise what I need to do? Thank you ver much.
login as: super
Keyboard-interactive authentication prompts from server:
End of keyboard-interactive prompts from server
No password has been assigned yet...
SSH@ICX7150-C12 Switch#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May6 2022 at 23:24:50 labeled as SPS08095g