cancel
Showing results for 
Search instead for 
Did you mean: 

Icx 7150-c12p syst orange

faddymak
New Contributor III

Performed reset but all lights still flashing Amber!!

2 ACCEPTED SOLUTIONS

faddymak
New Contributor III

Found it 

its resetting, will I have to still create the wifi name and password or will it use the one ones that were there before the issue ?

View solution in original post

Hi @faddymak 

Thank you for your time and patience on this case.

As discussed on the private chat, you were able to Upgrade your Switch to the latest SPS 08095g version. And issue is now resolved.

Did I answer your query? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

View solution in original post

56 REPLIES 56

Hi @faddymak 

Greetings!!!

Thank you for the response and the update.

Apologies for the inconvenience caused. Let me help you on this.

Could you please log into the CLI and share the output of the below commands?

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command 

enable 

show version

show flash

show inline power 
show interface brief

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again. We appreciate your patience and understanding. 

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Hello, I just came home, are you available to go thru this now ? 

HI @faddymak 

Thank you for the response.

Please share the output of the CLI commands shared in my previous post. I will continue to assist you on Monday since I am already out of my shift hours.

If any troubleshooting steps don't work, I will try to get an RMA approval on Monday.

Apologies for any inconvenience caused.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

It’s asking for a login, password and key to log in 

Hi @faddymak 

Greetings

Thank you for the response and the information you shared.

Please try the Switch default credentials will be as mentioned below. 

Username: super

Password: sp-admin

If the above credentials don’t work, you can try below default credential combinations as well.

 

If above credentials doesn't work, please try to login using Telnet option. (Please refer to the below screenshot)

Telnet – Port 23 (If SSH doesn’t work)

Please let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.