06-28-2024 05:52 PM - edited 06-28-2024 05:58 PM
Hi,
I have a Lennar Home with ICX7150-c12 with two R510 APs. Two of my ports on the switch are showing up as connected with warning and two of them have down status. I've tried to power cycling the switch but they still come back up to the same status.
I have my Desktop hardwired to one of the ports that are displaying 'Connected with warning' and the speed is extremely low (I get 800MBPS from other ports where as the yellow ones are restricted to 2MBPS), this issue started to happen after a power failure to the house last week.
07-01-2024 05:15 AM
Hi @harrypraneeth
Greetings!!!
Thank you for reaching out to RUCKUS Lennar Home Community.
I hope this message finds you well.
We appreciate the information you have provided regarding the issues with your RUCKUS setup following a recent power outage.
Before I assist you further, could you please log in to your Unleashed system on a LAPTOP WEB BROWSER using the Master AP IP Address OR https://unleashed.ruckuswireless.com/ and share a screenshot showing the information below highlighted in the screenshot?
Please share the requested information and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
07-02-2024 01:29 PM
Hi @harrypraneeth
Greetings!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
Thank you.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community
07-02-2024 02:25 PM
So I managed to update the firmware of the switch using the unleashed portal and the connected_with_warning message went away for now.
However, I'm seeing my connections being throttled at 100MBPS where as they should be 1GBPS, I tested the cables connecting them directly to my ISP's router and they are capable for 1GBPS and are CAT6. Do you know how can I fix this?
07-03-2024 05:48 AM
Hello @harrypraneeth ,
Greetings!
I hope this message finds you well.
Thank you for providing the information.
To proceed with further assistance on this issue, could you please refer to the attached image and share a comprehensive picture showing all cable connections to the switch ports?
Kindly respond to the above request, and feel free to ask if you have any questions regarding this matter.
Thank you once again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community