Showing results for 
Search instead for 
Did you mean: 

ICX7150-C12P ember lights blink

New Contributor II

Hi guys. Switch is not switching on. When i plug in there is a blink of ember lights and nothing after all. I have tried to reset according to instructions, but nothing happens. Please help me if you have any suggestions. Thanks


New Contributor II

Hey Imran. Video was uploaded. Please review and let me know. 

Hi @Vadymjabil 

Greetings of the day!!!

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.


Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.