ICX7150-C12-Switch Connect Internet

[techbeck]

So I am setting up equipment that came with my house.  Switch and two APs.  Switch was soft bricked and after i got everything working again, I can access wifi, switch admin page, and the AP config pages as well.  So everything working.

My setup is as follows.  Recently had fiber setup from my provider.  I had an old wireless i was using so I wanted to keep that while I transitioned all my many devices to the new wireless.

So, fiber box is connected to my ASUS wireless router.  Then I have cable going from my wireless router to port 3 on the switch.  Port 1 and 2 on the switch are where the APs are connected.  Both the old and new wireless are working at with this setup.

So now I want to get rid of the ASUS wireless part.  So I connected the fiber to port 3 on the switch figuring that was all i needed to do.  But I get not wireless on the new APs.  I restarted the switch, new aps, and even the fiber box and no help.  For the heck of it, i tried every other port on the switch as well with no luck.  Not exactly sure what the deal is.  Ideas?

Thanks

[pinky_ruckus]

Hello @techbeck ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hi @techbeck ,

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community