I have an issue stemming from a recent power outage. My primary image is corrupt, and the secondary image is the SPRxxxxxx.bin image which does not work in my configuration. I downloaded the latest stable image from the website which was listed as SPS08095g, but when I tftp'd it up I got an error stating "Invalid FI Image File: Header Type 0x403. I also received "Error: The header crc a000000 and the calculated crc 4c05e3bd mismatch" after the TFTP transfer was complete. I figured I would download it all again and check my configuration, but I got the same results. What am I doing wrong?
I wanted to provide an update for my resolution. I was not able to run the IOS commands you mention above. For some unknown reason, the GUI method wouldn't work for me as I had issues with the username/password. After some digging, I found another post here https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-... and followed it. I was able to load the mnz10114.bin with the image named SPS08080f.bin. I had to modify the commands listed in the procedure based on the being in the bootloader mode. I did not have success loaded the 08095gufi or 08095hufi image and still recieved the CRC errors. Any thoughts on why that may be the case?