Based on the troubleshooting done, and you confirm after the reset and booting up the Switch, the failure still persists with an error “PoE Fatal: Vmain (48V) fault has forced all ports on slot 0 to lose power.” this unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.
Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL) and paste it into the chat to start the unit replacement.
Please follow the below steps as shown in the below example:
As shown in the below picture, copy the link and share it via chat from the link provided below:
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved. UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a (24723488 bytes) from Primary SPS08061a.bin SW: Version 08.0.61aT211 Compressed Boot-Monitor Image size = 786944, Version:10.1.10T225 (mnz10115) Compiled on Sun Jun 25 09:25:15 2017 HW: Stackable ICX7150-C12-POE UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module Serial #: FEK3203P1AG Current License: 2X1G P-ASIC a• type B160, rev 11 Chip BCM56160_B0 UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
1000 MHz ARM processor ARMv7 88 MHz bus 8192 KB boot flash memory 2048 MB code flash memory 1024 MB DRAM STACKID 1 system uptime is 16 hour(s) 20 minute(s) 36 second(s) -More- next page: Space, next line: Return key, quit: Control-cPoE Fatal: Vmain (4 8V) fault has forced all ports on slot 0 to lose power.