CommScope RUCKUS Community Forums

WF_DUB · ‎11-02-2022

I have a lennar home and for about the past 2 weeks my ICX 7150 is not appearing on the Unleashed app. How do I resolve this issue?

Second question: This switch has a USB-A port for external storage (512gb i think). How do I access this port as a NAS, if that's what it's designed for?

Third question: How do I control MAC addressing to a specific port? I am assuming once I get the switch pack to appear on the iOS app I could control it from there? Or do I need to access the USB-C port?

Vásquez_Fer · ‎11-08-2022

Hi @WF_DUB

Hope you are doing well !

Is great to see that you are up and running.

In order see the ICX in the unleashed app is a bit tricky because you have to generate an ssh tunnel so in simple words is like private tunnel between the access points and the ICX.

1-Make sure the management approval is enable

https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-A887C55E-6973-4496-9413-302E8...

2- It would be great if you enable LLDP/RSA protocol on the switch side here is the commands:

Device>enable
Device#config terminal
Device(config)#lldp run
Device(config)#crypto key generate rsa

3-Hit Add on that dashboard

1-Put the IP address of the ICX switch

2-Username and password for Switch authentication like web page ( not the unleashed credentials )

https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-30C6694A-6AEE-4DF8-9459-1AB18...

Best Regards

Fernando Vasquez

View solution in original post

WF_DUB · ‎11-14-2022

Thank you

Vásquez_Fer · ‎11-15-2022

Hi @WF_DUB

No worries any time !

Please feel free to mark the post successful

Best regards

Fernando Vasquez

CommScope RUCKUS Community Forums

ICX 7150-C12P not showing in IOS App