RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Every time there is a power outage it will take at least a dozen or more reboots to get the switch to load into switch mode. I was looking through the forums and different articles. I have attempted to run a software recovery. However, following the direction from the following link https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-re...
I get the "not alive" when I try to ping after following the steps in the above link.
I've read in other posts that the out-of-band port is not responding and that it since the software recovery is not working, this is an RMA. Any other suggestions or other things I can try? Or is this considered a RMA
software recovery not working
Out band Port not Responding
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/ICX7150-stuck-in-boot-mode-q...
