ICX 7150-C12P all 11 status LED's Flash Yellow

[Bjoern_Toride]

Home network stop working. Observed all eleven status LED’s flashing amber in unison on the front left side of the ICX 7150-C12P switch. Swapped out power cord, same result. Unable to connect via USB-C serial & console.

Any help or advice would be greatly appreciated.

[Bjoern_Toride]

Not sure this matters but this post was moved from the ICX switch sub to Lennar Home sub, however this switch is not in a Lennar Home.

[Jayavidhya]

Hi @Bjoern_Toride 

Greetings of the day,

For detailed understanding of the issue, please share the following details.

1.Please confirm that the ISP ( internet provider ) is working fine because the Ruckus switch depend on it.

2. Connect any device ( PC )  directly or via Wi-Fi to your ( Local ISP ) router to make sure that the service is working fine  

3. Please make sure the devices are connected correctly : 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

4. Are the access points are getting powered?

5. Please let us know the LED status of the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

Best regards,

Jayavidhya

Lennar Home Community