ICX 7150-C12P Switch Bad Fit Kernel Image Format

[engineWorks]

Hello,

My ICX 7150-C12P switch stopped working. I tried to debug using the console cable on mac and have tried to perform factory reset multiple times. Is the switch is bricked already

Currently I see the following error

Rebooted the switch and went into factory settings
Booting image from Primary

NAND read: device 0 offset 0x0, size 0x2000000
6 ecc_errors after reading 18b8000:18b9c00
iproc_nand_read_page returned 2
NAND read from offset 0 failed -22
 0 bytes read: ERROR
## Loading kernel from FIT Image at 70000200 ...
Bad FIT kernel image format!
ERROR: can't get kernel image!
could not boot from primary, no valid image; trying to boot from secondary
device 0 offset 0x0, size 0xc0000
BOOTING image from Secondary

NAND read: device 0 offset 0x4000000, size 0x2000000
2 ecc_errors after reading 5c62000:5c62c00
iproc_nand_read_page returned 2
NAND read from offset 4000000 failed -22
 0 bytes read: ERROR
## Loading kernel from FIT Image at 70000200 ...
Bad FIT kernel image format!
ERROR: can't get kernel image!