cancel
Showing results for 
Search instead for 
Did you mean: 

ICX-7150, AP510, and AX1800 VLAN Help

james_dui
New Contributor II

Dear all,

I need help on creating separate VLAN for my IOT, Home Computer/Phone, Work Computer/Phone

I'm stuck as my created VLAN 2, 3, and 4 have no internet.

First step.  Created VLANs on ICX-7150 browser:

https://imgur.com/xNOTWjl

Second step.  Assigned VLANs to SSID on R510 browsers:

https://imgur.com/6y9Fkos

I think I missed a step.  Can someone provide any advice?  All WIFI SSID work if I give them VLAN 1.  However, I have a lot of IOTS that open myself as a cybersecurity threat.  

Thank you for your time!

1 ACCEPTED SOLUTION

Hi @james_dui 

The Tag on port 1/1/1 seems fine, however take in consideration that you need to tag all the ports where access point are connected and also the port that going to your ISP router, because that is the gateway for all the traffic.

 

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

View solution in original post

7 REPLIES 7

Hi @james_dui 

The Tag on port 1/1/1 seems fine, however take in consideration that you need to tag all the ports where access point are connected and also the port that going to your ISP router, because that is the gateway for all the traffic.

 

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

james_dui
New Contributor II

My VLAN works now.  I just had to tag 1/1/1 (connected to R51) and tag 1/1/2 (connected to router).  Thanks for everything.

Great, I am glad that it's working fine.

 

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community