cancel
Showing results for 
Search instead for 
Did you mean: 

How to safely turn off and later on a switch Ruckus ICX7150?

tiago1984
New Contributor

Hi there, I bought a no break to avoid switch corruptions in the future but wanted to check how can I safely turn off the switch ICX7150 and later turn on after I connect it to the new no break. Is there someone who can help me make the procedure in a safe way?

3 REPLIES 3

Jayavidhya
Moderator
Moderator

Hi @tiago1984 

 

Greetings of the day,

 

We cannot turn off the switch instead you can remove the power. Also please refer the below guide to hardware installation:

 

https://docs.commscope.com/en-US/bundle/icx7150-installguide/page/GUID-7166F0A4-38D8-4F69-9325-FF07A...

 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

 

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

RUCKUS UNLEASHED SETUP IN 5 MINUTES (tutorial video)

https://www.youtube.com/watch?v=j8I5aVwMNMg

 

General Precautions

 

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-EBA72259-1C90-4B87-A706-F0E49DDC72A...

 

Best regards,

Jayavidhya

Lennar Home Community

 

is there a way to prepare the switch via console its going to be turned off somehow? I want to avoid removing the power and causing it to get stuck in boot mode or get corrupted again like happened when I had a power shortage since I had to pay a tech to fix it. I just want to turn off to add a no break in the system.

Hi @tiago1984 

 

Hope you are doing well ! 

 

The only way to turn it off is by disconnecting it from the power source , there is no command to turn off the switch.

 

The way that we can avoid that switch get stuck on boot mode is upgrading to the stable versions for CIX-7150-C12P ( 8095g ) 

 

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

Video Link as reference: https://www.youtube.com/watch?v=DHIEajPhHWQ&t=186s

 

Via WEB GUI / TFTP option 

How to perform an Upgrade via Web GUI (ICX7150 Switch)

 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

 

 

Via USB/flash driver/ pen drive option 

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

Best Regards 

 

Fernando Vasquez