cancel
Showing results for 
Search instead for 
Did you mean: 

How to retrieve username and password for unleash app

Lex
New Contributor

 I’m unable to access the Ruckus Unleashed Home App on my iPhone due to be not being "not on network". I have ICX7150-C12-SWITCH and 2 APs, my wifi works very well but unable to manage my network by logging in the app. I saw the previous post how to troubleshoot this situation by looking for the IP address but my problem now is I don't know/forgot my username and password since I've been used to the facial recognition login prior. I need help pls on how to retrieve my username and password. Thank you!

16 REPLIES 16

Imran_ruckus
Moderator
Moderator

Hi @Lex 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that you are unable to login to the Unleashed App.

As you mentioned you tried using the IP Address of the Access Point, you should see the below-Unleashed dashboard after finding the IP Address of the AP. Try to log in

Once you see the above dashboard, please try to use the default combination credentials as mentioned below.

Please check and confirm and let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

OK will do and will let you know if successful. Thanks!

Hi Imran,

I tried all the combinations and none of them work. Is there anything else I can do?

Thanks!

Hi @Lex 

Thank you for the response and the information you shared.

Apologies, if no credentials are working we may have to proceed with factory reset of the Access Points.

Before we factory reset the APs, could you please let us know the answers to the below queries to assist you better?

1. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

2. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.