Even after reset, Couldn't able to login to Switch console

[VM_sky99]

First, I couldn't able to login with default credentials and started to reset the switch using CLI. followed all the steps mentioned to reset the console. In the OS entered the below commands

OS>reset

ICX7150-Boot>no password

ICX7150-Boot>boot

After that below is the log stuck at "TFTP session timed out" 

device 0 offset 0x0, size 0xc0000
BOOTING image from Primary

NAND read: device 0 offset 0x0, size 0x2000000
1 ecc_errors after reading 1b48000:1b48400
iproc_nand_read_page returned 2
NAND read from offset 0 failed -22
0 bytes read: ERROR
## Loading kernel from FIT Image at 70000200 ...
Bad FIT kernel image format!
ERROR: can't get kernel image!
could not boot from primary, no valid image; trying to boot from secondary
device 0 offset 0x0, size 0xc0000
BOOTING image from Secondary

Creating certificate, please wait...

SSL Client Certificate is successfully created

Press Enter key to login

PS 1, Internal Power supply detected.
PS 1, Internal Power supply is up.
PoE: Stack unit 1 PS 1, Internal Power supply with 124000 mwatts capacity is up
PoE Info: Adding new 54V capacity of 124000 mW, total capacity is 124000, total free capacity is 124000
PoE Info: PoE module 1 of Unit 1 on ports 1/1/1 to 1/1/12 detected. Initializing....
2000 log entries of PoE Event Trace Log Buffer is allocated on unit 1 for unit 1
PoE Event Trace Logging enabled for unit 1
PoE Info: PoE module 1 of Unit 1 initialization is done.
PoE: Power enabled on port 1/1/2.
PoE: Power enabled on port 1/1/3.
PoE: Power enabled on port 1/1/7.
TFTP session timed out
PoE: Power enabled on port 1/1/9.
TFTP session timed out
TFTP session timed out

Exit the console and open the console asked the credentials again. Tried to enter the default credentials but didn't work.

Below are the details from Printenv

ICX7150-Boot>printenv
baudrate=9600
ipaddr=
serverip=10.14
netmask=255.255.254.0
gatewayip=10.
uboot=mnz10115.bin
image_name=SPR08090d.bin
ver=10.1.15T225 (Jan 30 2019 - 23:08:47 -0800)

Please help me resolve the issue. My internet is not working on my mobile

[VM_sky99]

Hi Jayavidhya,

When I tried to upgrade using second option using tftp server, I'm getting the below error for the first command.

SSH@ICX7150-C12-Switch>ena
No password has been assigned yet...
SSH@ICX7150-C12-Switch#copy tftp flash 192.168.1.3 mnz10114.bin bootrom
Invalid input -> bootrom
Type ? for a list

[Jayavidhya]

Hi @VM_sky99 

Please upgrade the switch by using the following commands. Also you can find the mnz10114.bin in the Boot directory in the 08080f.zip

copy tftp flash 192.168.1.3 SPR08095gufi.bin primary

copy tftp flash 192.168.1.3 SPR08095gufi.bin secondary

Show flash  (ensure that you have the new flash code)

Write memory

Reload

Once you are done with the above commands please try to reboot your router. After the update the switch will take a while to start up so wait for few minutes as you switch got upgraded.

Please let us know whether your problem got fixed or not.

Best regards,

Jayavidhya

Lennar Home Community

[VM_sky99]

Thanks for the information, The issue is resolved and the switch is upgraded to latest version. You can close this issue.

Thanks

[Jayavidhya]

Hi @VM_sky99 

Thanks for your response,

Good to hear that the issue got resolved.

Please feel free to mark this post as ACCEPTED SOLUTION.

Also please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community