Accessing the ICX7150 Switch

[Joyced]

Hello,
My switch stopped sending power to my access ports and now I’m trying to access the switch but do not have the login for it. I’ve tried using the Usbc and Ethernet console port and neither would return the switch interface. Please help.

[Imran_ruckus]

Hi @Joyced 

Greetings!!!

Thank you for the response and the update.

From the screenshots you shared, I see your RUCKUS ICX-7150-C12P Switch is on an older 8061a non-UFI version. We suggest you upgrade the same.

Please refer to the below ‘Lennar Knowledge Base’ self-help guide for the same.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-71...

Please follow the upgrade process and let me know if you need any help during the process.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Joyced]

Hello - is there a recommended update after  08.0.95g? Also what’s the recommended version for AP model R510?

[Imran_ruckus]

Hi @Joyced 

Greetings!!!

Thank you for the response.

There are released versions after 08.0.95g. However, we suggest the 08.0.95g version for Lennar Home users as a stable one. And the recommended Access Point version is 200.14.6.1.203.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Joyced]

Okay sounds good. I just want to make sure the Access Point version is 200.14.6.1.203 will keep working with the 08.0.95g version. 

[Imran_ruckus]

Hi @Joyced 

Thank you for the response and the update.

Please let me know if you need any help during the process.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.