Access point power is not on

[varunkrissj]

I upgraded my ATT wirless modemat home and after that the access point pwoer is not on and also not showing green light on the ruckus icx7150. 

[varunkrissj]

Hello Imran, 
While upgrading it is failing at "copy tftp flash 10.176.220.51 SPS08095hufi.bin primary" . i downloaded from the 
https://support.ruckuswireless.com/software?filter=108#sort=relevancy&f:@source=[Software%20Download... and placed under the Upgrade folder.

telnet@ICX7150-C12 Switch>enable
No password has been assigned yet...
telnet@ICX7150-C12 Switch#
telnet@ICX7150-C12 Switch>enable
No password has been assigned yet...
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 sp
Incomplete command.
telnet@ICX7150-C12 Switch#^C
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 spz10114.bin bootrom
telnet@ICX7150-C12 Switch#TFTP: received error request -- code 1 message File no                                                                                                             t found

TFTP to Flash Error - code 17
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 mnz10114.bin bootrom
telnet@ICX7150-C12 Switch#Load to buffer (8192 bytes per dot)
...................
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(65536 bytes pe                                                                                                             r dot)...
............
TFTP to Flash Done.
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08080f.bin primary
telnet@ICX7150-C12 Switch#Load to buffer (8192 bytes per dot)
................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             .........................................................................
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(65536 bytes pe                                                                                                             r dot)...
................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             ................................................................................                                                                                                             .............................................................................
TFTP to Flash Done.
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08095gufi.bin primary
telnet@ICX7150-C12 Switch#The code type 64 is not correct for the target hardware, abort!
File Type Check Failed

TFTP to Flash Error - code 8
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08095gufi.bin primary
telnet@ICX7150-C12 Switch#The code type 64 is not correct for the target hardwar                                                                                                             e, abort!
File Type Check Failed

TFTP to Flash Error - code 8
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08095hufi.bin primary
telnet@ICX7150-C12 Switch#The code type 64 is not correct for the target hardwar                                                                                                             e, abort!
File Type Check Failed

TFTP to Flash Error - code 8
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08095hufi.bin  primar                                                                                                             telnet@ICX7150-C12 Switch#The code type 64 is not correct for the target hardwar                                                                                                             e, abort!
File Type Check Failed

TFTP to Flash Error - code 8
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 SPS08095hufi.bin  primary
telnet@ICX7150-C12 Switch#The code type 64 is not correct for the target hardware, abort!
File Type Check Failed

TFTP to Flash Error - code 8

[Imran_ruckus]

Hello @varunkrissj 

Greetings!!!

I hope this message finds you well.

Thank you for your response and update.

Please ensure that you have the following three upgrade files/patches in your folder shown in the below screenshot:

If you have confirmed the presence of these files, kindly ensure that you select the commands correctly and attempt to execute them again, starting from "copy tftp flash <ipaddress> spz10114.bin bootrom."

Please verify and inform me if this resolves the issue.

Thank you once again for your patience.

Best regards,

Imran Sanadi  
RUCKUS Lennar Home Community

[varunkrissj]

I do not see this file "spz10114.bin" in your screenshot. 

[varunkrissj]

I see upgrade folder,

I executed the copy tftp flash <ipaddress> mnz10114.bin bootrom

telnet@ICX7150-C12 Switch>enable
No password has been assigned yet...
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 mnz10114.bin bootrom.
Invalid input -> bootrom.
Type ? for a list
telnet@ICX7150-C12 Switch#copy tftp flash 192.168.1.155 mnz10114.bin bootrom
telnet@ICX7150-C12 Switch#Load to buffer (8192 bytes per dot)
...........................
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(65536 bytes per dot)...
............
TFTP to Flash Done.

[varunkrissj]

Also in the document  it says to execute 

copy tftp flash 10.176.220.51 SPS08095hufi.bin primary”  (upgrade the image)

I do not see this file "SPS08095hufi.bin" in the upgrade folder.