How do I add another R500 to my Cloud setup using meshing?

[andre_joubert]

Have 2 x unleashed R500's. Using Ruckus Cloud. Have setup both AP's using Ethernet cable. Then remove the 2nd AP, and deploy using power adapter, no Ethernet cable, expecting Meshing to be established to the primary AP.  The 2nd R500 won't join, stays unconnected.
Am I doing something wrong?

[chris_nicholson]

R500s used to lack mesh until the firmware supported it. I don't use ruckus cloud yet... but I was wondering if that Firmware on the unit supported meshing?

[andre_joubert]

It's working fine in my house with Ruckus Cloud. 2 R500's - in in primary mode and one in mesh mode.