CommScope RUCKUS Community Forums

andre_joubert · 01-25-2017

Have 2 x unleashed R500's. Using Ruckus Cloud. Have setup both AP's using Ethernet cable. Then remove the 2nd AP, and deploy using power adapter, no Ethernet cable, expecting Meshing to be established to the primary AP. The 2nd R500 won't join, stay...

andre_joubert · 01-20-2017

The R310 unleashed currently doesn't support meshing - will this change with future s/ware?

andre_joubert · 08-13-2017

It's working fine in my house with Ruckus Cloud. 2 R500's - in in primary mode and one in mesh mode.

andre_joubert · 01-26-2017

I've reset the R500, attached it back to the network via cable to get configured. Then tried again for it to attach via meshing. No joy.Any other ideas before I open a support case?the Firmware version of both R500's are the same - see attached pics

andre_joubert · 01-25-2017

thanks for the response Phal.Yip, I enabled the mesh config at original setup.Checked and the Use Mesh Netw...... is still ticked.

andre_joubert · 01-22-2017

hi - I've got a R500 as my primary AP, with the R310 as secondary. If I change the R310 as the primary AP, will the R500 work in meshed mode (i.e. no ethernet cable)?I'm using Ruckus cloud with unleashed AP's.RegardsAndre.

CommScope RUCKUS Community Forums

User Statistics

User Activity

How do I add another R500 to my Cloud setup using meshing?

R310 unleashed - no support for meshing? Will this change?

Re: How do I add another R500 to my Cloud setup using meshing?

Re: How do I add another R500 to my Cloud setup using meshing?

Re: How do I add another R500 to my Cloud setup using meshing?

Re: R310 unleashed - no support for meshing? Will this change?