Solved: stacking over copper ICX 7250

Anonymous · ‎12-09-2020

hello All,

can we do a stacking if we connect copper transceiver to uplink port on ICX7250-48P-2X10G ??

DarrelRhodes · ‎12-09-2020

Hi Amjad,

The Ruckus certified 10G-BASE-TX RJ-45 optic (10G-SFPP-TX-A) cannot be used for stacking.

Passive and active copper DAC cables are available and can be used for stacking.

For further details please refer to the Ruckus Optics family data sheet for further details: https://www.commscope.com/product-type/enterprise-networking/optical-transceivers/

Also be aware that 10Gb RJ45 optics have high power consumption and generate high temperatures, so it may not be possible to run 2x of these modules side-by-side.

Best regards,
Darrel.

View solution in original post

jijo_panangat · ‎12-09-2020

Hi Amjad,

What is the transceiver type/model been used for stacking ?
'show media' o/p will help.

Thanks
Jijo

Anonymous · ‎12-09-2020

@jijo_panangat
still don't have the transceiver

just asking before purchase process

DarrelRhodes · ‎12-09-2020

Hi Amjad,

The Ruckus certified 10G-BASE-TX RJ-45 optic (10G-SFPP-TX-A) cannot be used for stacking.

Passive and active copper DAC cables are available and can be used for stacking.

For further details please refer to the Ruckus Optics family data sheet for further details: https://www.commscope.com/product-type/enterprise-networking/optical-transceivers/

Also be aware that 10Gb RJ45 optics have high power consumption and generate high temperatures, so it may not be possible to run 2x of these modules side-by-side.

Best regards,
Darrel.

Anonymous · ‎12-09-2020

@darrel_rhodes

thank you for your quick answer

the same with 1G copper ?