power supply input voltage change

[wpfleeger]

We are upgrading our network power structure from 120v to 208v Is there anything I need to do to the ICX 7150-48PF before plugging it in to the new power supply?  I do not see a selector switch like older switches used to have.

[Chandini]

Hi Wpfleeger 

Thank you for reaching us. 

Please refer the below link of Hardware installation guide for more details on 7150 switch installation, do's and don'ts. I hope this helps. 

Link : 

• https://support.ruckuswireless.com/documents/1397-ruckus-icx-7150-switch-hardware-installation-guide

Thanks 

[wpfleeger]

Thank you for replying.  While this document tells me that the device is capable of running at both100v and 200v I do not see where it mentions any diferences in configuration between the two.  I would imagine that means the devices are hot swapable between different power sources (the power supply auto-negotiates between different voltage)  I hope I am correct in that assumption.

[Chandini]

Hi Wpfleeger 

Thank you for reverting. 

From the pic attached below the 7150s do have a note on the back of the switch saying ‘AC Input Rating 100v to 240v’ (as below for a 7150-48PF). The hardware installation guide has this information as well. 

I hope this helps answer your question.

Thanks