This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

error invalid input when trying to create ve interface

Anonymous
Not applicable

‎11-09-2018 07:22 AM

I'm getting the error invalid input when trying to create ve interface
Firmware version :  SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"
Reply
3 REPLIES 3

BenBeck
Moderator
Moderator

‎11-09-2018 07:25 AM

Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us
0 Kudos
Reply

Anonymous
Not applicable

‎11-09-2018 08:03 AM

Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks
Reply

agent_halal
New Contributor II
In response to Anonymous

‎08-14-2025 08:13 PM

I have a ip addr set too, how did you clear it? The port it says I have an ip addr is my uplink port to a switch but eventually to my modem, would clearing the ip effect anything? anything helps! 

0 Kudos
Reply
Copyright © 2026 Khoros, LLC