cancel
Showing results for 
Search instead for 
Did you mean: 

error invalid input when trying to create ve interface

dragos_dimitriu
New Contributor II
I'm getting the error invalid input when trying to create ve interface
Firmware version :  SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"
2 REPLIES 2

BenBeck
Moderator
Moderator
Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

dragos_dimitriu
New Contributor II
Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks