The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
Hello,we have following schema :Mikrotik CCR -> Brocade 6450 As COre Switches -> others brocade 6450 connect to core switcheswe have a problem and thats when some one send unicast flood we can not limit it, in cisco we limit it by storm, and in broc...
I have ICX 7450 and have purchased Prem LIC for L3 Routing. Now ICX7450-PREM-LIC- SW is showing non complaint. what should do next. is it okay or need i have to contact TAC
I'm working on setting up a 4 unit stack of ICX 6450-48s. Firmware installed is 8.0.3n - Routing. I am getting a continuous stream of the following entries to the console port:T=17h5m20.1: Election, was active, no change, ID=1, pri=128, 4U(1-4), A=...
Hi , i try to make dot1x configuration but i get this information. How to resolve it ? telnet@7450_B28-P1(config-authen)#dot1x enable ethernet 2/1/2Error - MAC-AUTH/Dot1x cannot be enabled on UNTAGGED port 2/1/2 on non-system default vlan telnet@745...
