Hello to All,I'm going to design and deploy network infrastructure in huge building based on Brocade ICX switches and other vendor switches (let's say "MS switches"). As I'm new at Brocade, I need to ask for an advice. The topology will be the star w...
ICX6610-48PE08030mb layer3 codeacl-per-port-per-vlan is enabledusing MAC AUTH and Radius for VLAN steeringtrying to apply an (ip access-group x in) to VE fails with: ERROR: Dot1x/MAC-Auth exist on selective ports of this VE port. What is the recommen...
Hello,in cisco with following commands we can set a switchport back for a port but i do not find anything like them for ICX 6450 , can anyone help us ? switchport backup interface Gi1/0/46 switchport backup interface Gi1/0/46 preemption mode forced s...
Hi All, I've got a couple of r720 unleashed to run in our small office. They are connected to a Brocade ICX6450-48pI've ready probably everything about this topic before make my own post, and I'm sure I'm missing something, but I'm really out of i...
We have heard from a number of customers and partners who are experiencing some difficulties with the transition from the legacy Brocade licensing tool (Brocade Software Portal) to the suite of licensing tools in the Ruckus Networks Support Portal. ...
