If you are updating to 08.0.80ca, please note that there is no bootloader included. I'm pretty sure if you try to boot with the old pre 08.08 bootloader (10.1.11?) on the new code, it will not boot. I've had no issues on configurations running 08.0...
We have a pair of (Brocade) ICX 7750s working as our core routers (we are using MCT, BGP, OSPF, VRRPe). We are currently running firmware version 08.0.30h. We noticed that according to the support site, 08.0.30r is the recommended firmware version al...
Good morning,I'm having problems getting NTP to work on our ICX 7150/7650 switches. Based on the documentation, the configuration should work, but it does not appear to even be sending any packets to the NTP server.The NTP server is in the specified...
Hello,i have 10x brocade icx 6450 switches so i have a acl like as following :Standard IP access list port5: 2 entriespermit host x.x.x.xdeny anythen i have applied it to a port switch which is connected to x.x.x.x and when i send tcp syn attack with...
Hello guys, First of all, i would appreciate any workaround that anyone could give me. I have a large Switch network for a LAN of a univerisity campus here. This network is mixed with switchs HP for the distribution layer and ICX7150 for the access l...
