My office has an older Brocade FCX 648-S from which I'm trying to get more throughput. It's configured as a layer-3 switch with several VLANs. I've only been able to get about 150 Mbit sustained throughput from any single client connection. So far ...
I am new to ruckus switches and I have a deployment project in one of our customers datacenters involving 2*ICX7150-24-4X10GR-RMT3 & Nutanix servers and I have those below questions if any one could guide me I would be very grateful 1)for stacking...
Hi there and thanks to those on this Forum who have helped me get this far with my Network Plan.I was recommended that only four R720 APs should be loaded onto my ICX7150-C12P switch due to power budget constraints, so I decided to order a second one...
ICX7450 running 10.1.16T215, when I configure additional static routes they aren't getting added to the routing table - so the destination is still just hitting the default route.Tried different AD / cost and prefix length from /20 all the way to /32...
Hello a question that I hope you can solve, with the Ruckus brand team I can achieve the following, I need 500 access points for p-m-p links with a transfer capacity of 200 mbps. 2x2 mimo / ofdm radio frequency range 4910-5970 mhz. 16dbi ip55 gain.I ...
