RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

Why selective legacy PD detection ?

Can someone please tell me why Ruckus states (see http://docs.ruckuswireless.com/fastiron/08.0.80/fastiron-08080-managementguide/GUID-8CF5299E-3CBC-42FB-AB14-646929DF6007.html) Legacy PD detection should not be enabled on ports where power-consuming ...

Alert from SZ when managed switchport goes down

I have a vSZ (5.1.2.0.302) with a few managed switches (7150) and I'm trying to figure out how to get an alert from the vSZ when one of the ports in the switches goes down or comes up.Is there anybody who have any ideas ??The switches are accessing t...

How do I delete startup-config.legacy from an ICX 6450?

I have some switches I'm disposing of, and the file startup-config.legacy is sitting on the flash with no way to delete it. The CLI only lets me remove boot images or specifically startup-config, but not this file. Any clever ideas here? I can't fi...

ICX 7150-24-4X10GR specification

Dear support,Could you help to confirm that ICX7150-24-4X10GR can meet the requirement as below. Thanks1. Shall provide not more than 200ms stack convergence2. Shall provide link redundancy without enabling any Spanning Tree Protocol3. Shall have emb...

Unable to add ICX 7150 C12P switch to Unleashed dashboard

Trying to add the ICX switch to the dashboard under the 'Switches' section. When I add the IP address and login info, it forever says 'Connecting'. In the switch logs, I see the following...May 21 11:00:04informationalSecurity: SSH terminated by ad...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

3

1

1