cancel
Showing results for 
Search instead for 
Did you mean: 

Why can't I enable multicast on ICX 7250

sven_schoneveld
New Contributor II
We are using the ICX 7250 switch in combination with data diodes and for that reason we need multicast to be enabled. But when I enable the multicast via the web interface of the ICX 7250, it disables itself after applying. Is there a trick or firmware update needed ?
7 REPLIES 7

jijo_panangat
RUCKUS Team Member
Hi Sven,

Are you doing L2 Multicast ( Igmp snooping) or L3 Multicast (PIM, IGMP/MLD) ? 

Please post 'show version' o/p from the switch here.



Thanks
Jijo 

sven_schoneveld
New Contributor II
We are doing plane multicast. Since the data has to go through a data diode, IGMP snooping needs to be disabled. I will check on the version.

sven_schoneveld
New Contributor II
Image_ images_messages_5f91c455135b77e247a2e587_f5ac2fcd07a1d36c9b10f5cfb3f37129_RackMultipart2019112668674b3tj-a17520ff-cc7e-4e80-85eb-e471ed2fff06-236369002.jpg1574791289

jijo_panangat
RUCKUS Team Member
Hi Sven,

Pls upgrade to 8070g and redo the test.


Thanks
Jijo