Upgrading firmware ICX 7150 from 08.0.90jT211

[freddycct]

Hi,

Is 08.0.90jT211 a UFI firmware? That means I only need 1 step to upgrade to the latest stability firmware SPS08095jufi is that right?

[Chandini]

Hi Freddycct

Thank you for reaching us. 

Yes 8090j also has a UFI image. You can check by running "Show version". If its a UFI firmware when you run the command image name will end with UFI. 

Yes you can upgrade to 8095j directly from 8090j UFI image. But first run "show version" and validate the firmware first. 

I hope this helps. 

Thanks 

[freddycct]

telnet@ICX7150-C12-Switch>Show version
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Jan  5 2021 at 21:06:08 labeled as SPS08090j
      (29360128 bytes) from Primary SPS08090j.bin (UFI)
        SW: Version 08.0.90jT211
      Compressed Primary Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
       Compiled on Mon Jul 13 08:53:29 2020

Can help me see? Is this UFI? 

What's the recommended way to flash this to 08.0.95 ?

[Chandini]

Hi Freddycct

Yes from the details shared 

Primary SPS08090j.bin (UFI)

The above details says its a UFI image and its a switch code "SPS" router code is represented as "SPR"

You can upgrade to SPS8095jufi image. 

Link: 

• https://support.ruckuswireless.com/software/3648-ruckus-icx-fastiron-08-0-95j-ga-software-release-zi...

I hope this helps.

Thanks