I recently upgraded my ICX7150-C12P to 10.0.10f SPR firmware from the 09.0.10j.cd4 SPS and since re-adding the switch to unleashed i have the problem that the switch keeps wanting to join on 5.137.250.224.(see screenshot below) Even tho the switch is already connected to unleashed and otherwise working fine.
When approving this "switch" it isn't able to communicate to this specific interface, it also can't be removed. Removing the existing switch doesn't resolve it either. I can get it working again by specifing the correct IP in unleashed for the discovery, but then i get the annoying 5.137.*.* IP back in the approval list. This isn't a valid IP in my subnet, and also never set in the switch. The switch has also been factory reset since the firmware upgrade and the troubleshooting.
Unleashed logs report: Failed to add ICX [c0:c5:20:99:4f:f1]. The ICX already exists. Please enter a different one. The MAC address from the one i specified (my managemt ip) and the one unleashed tries to connect (5.137.*.*) are the same (?)
I'm running unleashed version 200.16.7.0.402, i have tried to upgrade 200.17 but this gave me alot of issues with my R350 AP's.
I would like to keep on the 10.0 track now, but if there isn't any fix or update expected soon i think it's the best to go back to the 9.0 track.
This is what the unleashed logs tell me:
Dec 28 17:39:03 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: start to access ICX as user "super".
Dec 28 17:39:03 RuckusAP Beneden syslog: M8d2023S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: OLD_STATE=[discovery], have_approve=1, icx_username=[]
Dec 28 17:39:02 RuckusAP Beneden ZD-APMgr: Ma33b02S0D0 IPC_thread rcv ping from TACMON
Dec 28 17:38:53 RuckusAP Beneden syslog: M8d2022S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: NEW_STATE=[discovery], delay 10 seconds.
Dec 28 17:38:53 RuckusAP Beneden syslog: M8d2022S0D0 pid=2769[14546], icxd_discovery():ICXD: ICX[id=2]: 5.137.250.224: icx-test-default done, result is [NO_RESULT]
Dec 28 17:38:53 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: lastline "==================== LOGIN(test-default): (Sat Dec 28 17:38:43 CET 2024) ====================", expect "assword:".
Dec 28 17:38:51 RuckusAP Beneden syslog: Mad1fd6S0D0 pid=2769[2769], doJobEx():worker: action:[cleanup-response], Done.
Dec 28 17:38:43 RuckusAP Beneden empty: forked dbclient -y -l super 5.137.250.224
Dec 28 17:38:43 RuckusAP Beneden empty: version 0.6.20b started
Dec 28 17:38:43 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: ping 5.137.250.224 success.
Dec 28 17:38:43 RuckusAP Beneden mping[21230]: status=succ result=34 to_pid=1243 ports=1 ports_signaled=1
Dec 28 17:38:43 RuckusAP Beneden mping[21230]: mping 512: cmd=arping -u -z 195 -q -f -c1 -w1 -S 34 -P 21230 -l/tmp/mping_hm_latency.log -I br0 192.168.168.1 &
Dec 28 17:38:43 RuckusAP Beneden mping[21230]: Target default gateway 192.168.168.1 via br0
Dec 28 17:38:41 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: start to access ICX as user "super".
Dec 28 17:38:41 RuckusAP Beneden syslog: M8d2022S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: OLD_STATE=[discovery], have_approve=1, icx_username=[]
Dec 28 17:38:32 RuckusAP Beneden ZD-APMgr: Ma33b01S0D0 IPC_thread rcv ping from TACMON
Dec 28 17:38:31 RuckusAP Beneden syslog: M8d2021S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: NEW_STATE=[discovery], delay 10 seconds.
Dec 28 17:38:31 RuckusAP Beneden syslog: M8d2021S0D0 pid=2769[14546], icxd_discovery():ICXD: ICX[id=2]: 5.137.250.224: icx-test-default done, result is [NO_RESULT]
Dec 28 17:38:31 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: lastline "==================== LOGIN(test-default): (Sat Dec 28 17:38:21 CET 2024) ====================", expect "assword:".
Dec 28 17:38:21 RuckusAP Beneden empty: forked dbclient -y -l super 5.137.250.224
Dec 28 17:38:21 RuckusAP Beneden empty: version 0.6.20b started
Dec 28 17:38:21 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: ping 5.137.250.224 success.
Dec 28 17:38:21 RuckusAP Beneden syslog: Mad1fceS0D0 pid=2769[2769], doJobEx():worker: action:[cleanup-response], Done.
Dec 28 17:38:19 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: start to access ICX as user "super".
Dec 28 17:38:19 RuckusAP Beneden syslog: M8d2021S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: OLD_STATE=[discovery], have_approve=1, icx_username=[]
Dec 28 17:38:13 RuckusAP Beneden mping[20980]: status=succ result=34 to_pid=1243 ports=1 ports_signaled=1
Dec 28 17:38:13 RuckusAP Beneden mping[20980]: mping 512: cmd=arping -u -z 195 -q -f -c1 -w1 -S 34 -P 20980 -l/tmp/mping_hm_latency.log -I br0 192.168.168.1 &
Dec 28 17:38:13 RuckusAP Beneden mping[20980]: Target default gateway 192.168.168.1 via br0
Dec 28 17:38:12 RuckusAP Beneden syslog: Mad1fc9S0D0 pid=2769[2769], icxd_av_is_supported():ICXD: AV_Profile[icx-id:2,unit-id=1] The model don't support AV profile
Dec 28 17:38:12 RuckusAP Beneden syslog: upgrade_debug: pid=20976, insert_field_to_upgrade_ap_list(): firmware_file open failure
Dec 28 17:38:12 RuckusAP Beneden syslog: upgrade_debug: pid=20976, get_ap_list(): see [/tmp/unleashed_upgrade/upgrade_ap_list_from_election.xml.ready], ap-list ready!
Dec 28 17:38:12 RuckusAP Beneden syslog: upgrade_debug: pid=20976, get_ap_list(): ap-list loop 0.
Dec 28 17:38:09 RuckusAP Beneden syslog: M8d2020S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: NEW_STATE=[discovery], delay 10 seconds.
Dec 28 17:38:09 RuckusAP Beneden syslog: M8d2020S0D0 pid=2769[14546], icxd_discovery():ICXD: ICX[id=2]: 5.137.250.224: icx-test-default done, result is [NO_RESULT]
Dec 28 17:38:09 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: lastline "==================== LOGIN(test-default): (Sat Dec 28 17:37:59 CET 2024) ====================", expect "assword:".
Dec 28 17:38:02 RuckusAP Beneden ZD-APMgr: Ma33b00S0D0 IPC_thread rcv ping from TACMON
Dec 28 17:37:59 RuckusAP Beneden empty: forked dbclient -y -l super 5.137.250.224
Dec 28 17:37:59 RuckusAP Beneden empty: version 0.6.20b started
Dec 28 17:37:59 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: ping 5.137.250.224 success.
Dec 28 17:37:57 RuckusAP Beneden sys_wrapper: icx_test_default():ICXD: ICX[id=2]: 5.137.250.224: start to access ICX as user "super".
Dec 28 17:37:57 RuckusAP Beneden syslog: M8d2020S0D0 pid=2769[14546], icxd_state_loop():ICXD: ICX[id=2]: 5.137.250.224: OLD_STATE=[discovery], have_approve=1, icx_username=[]
Dec 28 17:37:51 RuckusAP Beneden syslog: Mad1fb7S0D0 pid=2769[2769], doJobEx():worker: action:[cleanup-response], Done.
