SZ100 with ICX7750-48XGC ,,,how to connect physically

[lotus_administr]

i am implementing a NEW SZ100 with an existing network setup ,, the Core Switch is ICX7750-48XGC with 7 stacks..

am new with Ruckus WLC as well as Ruckus Switches... 

please help me to understand its physical connectivity and Data plane communication.

am Connected first 2 ports of WLC to Core Switch ,, the LAG is created at Core with 2 ports ,,,
Port 5/1/47 and 48 ..these 2 ports are part of LAG-11

lag blue static id 11
 ports ethe 5/1/47 to 5/1/48
--------------------------------------
vlan 12 name Managment by port
 untagged lag 11



is the setup and doing is correct ??

please suggest any correction if required 




thanks,
Anvar

[santhosh_dk]

HI Anvar,

LAG will not be supported by SZ100, there is Feature Request already to include this feature.

Kindly connect a Ethernet cable to port1 or Port2 of SZ100 to configure, please refer Quick setup and getting started Guide below.

https://ruckus-support.s3.amazonaws.com/private/documents/2817/SZ100-QuickSetupGuide-RevG-20200827.p...

https://ruckus-support.s3.amazonaws.com/private/documents/2816/SZ100-GettingStartedGuide-RevH-202008...

Regards

Santhosh 

[lotus_administr]

[lotus_administr]

Hi Santhosh ,

these pages are not able to open ..looks links are not working