Ruckus to HP switch

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

hi network master's, just had a unexpected issue here, im running 3 icx switch. L3 and two L2 unfortunately and strange reason my L2 went down for good as a temporay solution i used our old HP switch as L2 switch. my problem is im am not really familiar configuring this model. here is my setup

ruckus switch L3
I created a LAG uplink for HP

lag uplink dynamic id 1
ports ethe 1/2/1
port-name Uplink ethernet 1/2/1

SWI-CORE#show lldp neighbors
1/2/1 7446.a025.9d40 876085248 48 SWKGPS-HP1

SWI-CORE#show lag
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1/2/1 Up Forward Full 1G 1 Yes 254 0 903a.7227.ca50 Uplink

on switch-hp1 i created a trunk for uplink port 48 which succesfully establish the connection, however i am not sure how to configure the uplink for my switch-hp2. just wondering if you guys experience to config HP switch?

Please help, thank you

3 REPLIES 3