cancel
Showing results for 
Search instead for 
Did you mean: 

RUCKUS ICX 7450-48F L3 configuration issues

sogalli
New Contributor III

HI I have a new RUCKUS ICX 7450-48F. when i try to configure L3 Virtual interface, the below highlighted command are invalid. if i try to configure a port with an ip address command is invalid.

device# configure terminal
device(config)# vlan 2 name Marketing
device(config-vlan-2)# untag ethernet 1 to 4
device(config-vlan-2)# tagged ethernet 24
device(config-vlan-2)# router-interface ve 2
device(config-vlan-2)# interface ve 2
device(config-vif-1)# ip address 10.1.2.1/24

1 ACCEPTED SOLUTION

ys
New Contributor III

Hi,

You will need L3 premium license if you need functions below.

ys_0-1663836157379.png

https://support.ruckuswireless.com/articles/000006815

 

View solution in original post

5 REPLIES 5

BenBeck
Moderator
Moderator

Hey @sogalli 

You do not need a premium license just to make a VE. That is included in the base licenses. You may be running the switching image. Please check 'show version' to confirm. SPS code would be the switching image, while SPR code is the routing image. You need to be on the routing image to make VEs. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us