cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with writing to flash on ICX

miroslav_vukovi
New Contributor III

Hi,

I'm trying to write changes to new configuration on ICX7150-C12p but I receiving this message:

flash_fcreat: Failed to create file startup-config.txt
Error - failed to create startup-config.

After reboot, all the changes are gone. Is this a hardware failure or software. Any help would be appreciated.

Thanks

Miroslav

2 REPLIES 2

mohammad_atmazi
New Contributor III

 It's a hardware failure.

Contact support, and open RMA, and you will receive a new switch 

Good luck.

BenBeck
Moderator
Moderator

This sounds like a flash issue, but I would open a support case (see my signature) and have somebody formally take a look. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us