New Switches setup

[robert_berki]

With the 8200 series of switches, is it still necessary to use Putty for setup? Are they shipping with functions already active and the GUI can be accessed in a simpler way?

[Sgatjens]

Hi Robert

The initial setup can only be performed using the command line interface (CLI). You can use the web GUI, but it must be enabled first before you can use it for configuration and monitoring.

Here are our guides for the ICX8200 model:
https://docs.commscope.com/bundle?cluster=true&labelkey=fi-10.0.20&labelkey=fi-10.0.10&labelkey=fi-0...

Kind regards,

Sofia Gätjens

Technical Support Engineer | L2 TAC Wired

 

COMMSCOPE

now meets next

[Chandini]

Hi Robert_berki

Thank you for reaching out to us.

Based on the details you provided, it seems you are inquiring whether the 8200 switch model requires the use of Putty or another terminal emulator for the initial setup. For using most features, access to a terminal emulator tool would indeed be necessary during the initial setup.

The setup process for the switch can vary depending on your specific requirements.

Could you please provide more details about your requirements so that I can assist you more effectively?

Thanks