MS Light Glowing

[syed_ali_9bdjzy]

I have 2 Core switches as Redundant (ICX 6610 24F) There is MS Green light is glowing in 1 switch and Other switch is glowing Green. what it means?

[netwizz]

It is the stacking lights.

Off (no light) - Stacking mode is enabled and the switch is a stack member operating in slave mode, or the switch is operating in standalone mode. 

Blinking green - Device is initializing Steady green Stacking mode is enabled and the switch is the stack master.

Steady amber - Stacking mode is initializing and the switch is the standby controller .

Blinking amber - Stacking mode is initializing and the switch is in stacking master arbitration/selection state.

[syed_ali_9bdjzy]

thank you netwizz

[netwizz]

Good Afternoon:

You will probably get a lot more information with the "show stack" commands.

"show stack ?" to list what is available.